Kit contains Hard floor cleaner, Hard floor fresh & Hard floor polish 750ml plus clothes.
Ciranova Lacquered Maintenance Kit
During the first 7 days the varnish hardens (especially
two-component varnish). Therefore Following precautions are
Dont move heavy furniture or seats (drag).
Dust with a vacuum, broom or cloth (not impregnated materials).
Apply adequate protection (felt) under the legs of tables and chairs.
The varnished floor must be cleaned with a vacuum cleaner and Hardfloor Ciranova
Fresh ®. Please note that you dont use products that contain waxes because this can cause adhesion problems for the after-treatment.
Then maintain with Hard Floor Polish Ciranova ®.
Regular maintenance with Hard floor Fresh Ciranova®, a waterbased
ecological cleaner for all types varnished or lacquered
wooden floors. Mix 100ml in10l lukewarm water. Moisten the cloth
with this solution and mop the floor fresh and hygienic at once.
Rinse out the mop and wring out well. Avoid excess moisture on
the wooden floor.
Prevent early wear to the surface by using Hard Floor Polish
Ciranova®. With new varnished floors, you need to wait at least 14
days before you use the polish. Pour a little bit of Hardfloor Polish
Ciranova® on the floor and spread it with even strokes over the
surface with a mop. Always mop in the direction of the wood to
avoid streaks. It is advisable to use Hardfloor Polish Ciranova®
4 times a year in commercial spaces etc., and use Hard Floor Cleaner
to remove old contaminated layers.
To renovate a varnished wooden floor, you first need to sand the
old layers of varnish, remove the sanding dust and then you must
apply a new coat(s) of varnish. On a lacquered wooden floor, the
wood will fade where the varnish is worn what makes it difficult to
obtain a uniform finish. Therefore it is important to apply timely a
new coat of varnish (after completely sanded the old layers). After
finishing the wooden floor, respect the time needed so the varnish
can hard out.